Year: 2004 <
Stock Number: MF-013118
WOODSTORM L100 Lateral Chain Moulder Infeed for feed through moulders. The "L100's" cap. 3' - 16' long, 3/8" - 3-1/2" thick and 3/4" - 9-1/2" width; feed speeds of 20 - 120 FPM via inverter controlled drive to (2) bottom rollers. -- The feeder consists of 38" deep x 12' long lateral feeding (8) chain deck, a top & bottom roller infeed system, and a short bridge table that connects the chain deck to the Moulder. The 1st upper roller is controlled by a proximity sensor and adjustable timing device. The pinch roller setup propels each workpiece to the drive roller combination; driving the piece toward the Moulder. The upper urethane rollers are pneumatically controlled in order to handle differences in workpiece thickness. -- The chain Deck lateral transport system chains tracking on UHMW wear strips for maintenance-free operation. -- A separate 10 HP motor with variable speed control provides power and control to the chains. -- The chain deck comes with dual mode operation, the operator can chose to have the chain deck run continuously or "on-demand" mode the chain deck is controlled by the system's PLC through the pinch roller sensor and runs only when a workpiece is needed. -- Includes: Filter, regulator, lubricator for pneumatic system, and short bridge table to connect to moulder; machine is delivered "plug-and-play" ready for immediate duty. After alignment to your Moulder, simply hookup power and air to the control panel. .