B. Franks Farms

Start Date: Jun 22, 2019


Log Decks • Mellott Log Turner Miner Edger • Precision Tub Grinder Prentice Log Loader • And MUCH More!


Kittrell Auction Group

Phone: 931-797-6284

Call Email

Terms

Full payment day of auction either by cash or cahiers check. Personal or company checks will only be accepted when accompanied with an irrevocable verifiable bank letter of guaranteed with statement of limit. Full payment must be made before leaving the sale location. Equipment sold “AS IS- WHERE IS” with no expressed or implied warranties. Sale Day Announcements will take precedence over any written material. 10% Buyers Premium On Site, 13% Buyers Premium Online.
Map Auction Location

Inventory

  • Approx. 15’ (2) Strand Log Deck w/H-78 Chain w/Stop and Load
  • HMC V206 Debarker, Rosser Head, S/N 1749.00, Slant Track, Bull Wheels Excellent, Pan Sweep Conveyor w/Incline Section for Bark Removal
  • 21’ Hurdle (3) Strand Infeed Log Deck w/(2) Arm Stop & Loader w/Nose Skid Section, Tulsa Winch Drive, (3)rd Strand is Added, All H-78 Chain
  • Mellott Chain Type Log Turner, Runs on Mill Hydraulics, Hurdle (2) HB Modular Mill, S/N 1295 w/Mass Setworks, 200 HP Motor, Husk Mount Carriage Drive
  • 25’ Off Bear Belt w/Husk Mount Carriage Drive
  • 54’ Rollcase 8” x 24” Wide Rolls, (19) Rolls and Stop Position, (3) Strand R60 Roller Chain w/HD Gear Motor Reduction Drive
  • FS Curtis Horiz Tank Mount Air Comp. (Destroyed), 45 HP Air Comp. w/Air Reserve Tank (Works Great)
  • Schurman Combination Gang Edger TB L42, S/N P-1130, (Inserted Tooth Feed Rolls), 8 ½’ Infeed Table w/Shadow Line Light, Outfeed Landing Table (Shifting Saw), 100 HP Elec Motor, (1) Movable Saw
  • 15’ x 20” Wide Pan Sweep Conveyor w/81X Paddle Chain, Under Edger to Remove Dust
  • Chicago 24” Blower w/10 HP Motor, Size 9
  • Pan Sweep Conveyor under Hurdle Mill w/Incline Section
  • Collection Fan w/Hopper Feed & Discharge Chute for Van Loading Includes Steel Sub-Structure
  • 27’ (2) Stand Lumber Cant and Lumber Chain w/Dead Roll Catch Section w/Detachable Chain
  • EM Chop Saw (Cut Off) w/15 HP Electric Motor
  • 50’ x 18” Gravity Feed Rollcase w/Welded Stops at 9’6”, 10’4”, Gravity Roll Decline & Tie Stacking Bin
  • 2008 Pendu Model A18B10-RH collection Fan S/N 02 w/Motor, Infeed & Discharge Pipe
  • (3) 56” F8 Inserted Tooth Saws
  • 20’ Precision Vibrating Conveyor, 10” Deep
  • Morbark 58” (3) Knife, S/N 543 Chipper, Lincoln 150 HP Motor & New Discharge Elbow
  • Cutler Hammer Disconnect at Chipper
  • Precision 6’ x 6’ Chip Sizing Screen, S/N S:2150 w/New Cyclone Collector & Oversize Chip Return
  • Chip Blower w/Dual Chute Load-out for Vans
  • Precision (4) Station Tub Style Knife Grinder
  • Hand Set Sawmill w/Air Dogs, Diesel Power, Husk Frame w/Saw, Track & Rail, Chain Type Log Turner w/HPU
  • Spare Motors Ready to Use: Baldor 25 HP Motor, 460V, Brook 125 HP/ 1740 RPM 440V, Marathon 200 HP/ 1780 RPM/460V, Max 20 HP Motor
  • Miner Edger w/Infeed & Outfeed
  • Hand Set Sawmill w/Air Dogs, Diesel Power, Husk Frame w/Saw, Track & Rail, Chain Type Log Turner w/HPU
  • 1998 Prentice 410D Knuckleboom Loader w/Heel, Includes Hudson Delimber, S/N 41025188 w/John Deere 6059T Engine (7,000 Hours Showing)
  • LMI Bar Type Log Bucking Saw
  • International Boom Truck
  • 2006 International Model 9200i SBA 6’ x4’, Day Cab Road Tractor, VIN 2HSCESBR47C238112 w/CAT 3406 Diesel Engine
  • Fairbanks 60’ Truck Scales 80 Ton Model 50-557A, S/N 997125RA (Ready to Load)
  • 44’ Transcraft Drop Deck Trailer 35 Ton, Model DTX-18-44 w/Ramps, VIN ITIF48202V2006817
  • Transcraft Eagle Super Beam Spread Axle Flatbed Trailer, VIN TG11476
  • 8’ x 16’ Dump Bed w/Roll Back Tarp (Very Good Condition)(New)
  • Fruehauf Closed Top Chin Van VIN IH2V04823DA012105
  • Fruehauf Closed Top Chip Van, VIN 1H2V04827JA000101
  • Trailmobile Closed Top Chip Van, VIN 1PT024AAH5F9010600
  • Innovative Closed Top Chip Van, VIN INNZ54527RM2025506
  • John Deere 250G LC w/Excavator Bucket, S/N 1FF250GXKCE608666, 5,100 Hours
  • Caterpillar D8N High Track Dozer, Excellent Under Carriage, New Rails & Track, 14’ Blade, Fully Enclosed Cab, 6-Way Blade, S/N 97C054524, 13,000 Hours w/0 Hours on Cat 3406 Engine (Complete Rebuild)
  • Turbo Turf Bale Hay Blower w/Honda GX620 V-Twin
  • John Deere 4040 Tractor, 100 HP Engine
  • John Deere Drill, S/N 6408S
  • 1971 Mack Truck w/Dump Bed
  • 2000 Ford 350 Dually Truck Bed
  • Goose Neck Trailer (needs new floor)
  • Hay Cutter
  • Hay Spreader or Turner
  • Barko 160 Knuckleboom Loader
  • Square D 800 AMP Main Entrance Installed New
  • Square D 400 AMP Main Entrance Installed New
  • (1) Toshiba C3-250N Motor Control for 200 HP Motor
  • (2) Toshiba C3-150N Motor Control
  • (1) Eaton Soft Start for 150 HP Motor
  • Wire & Conduit Easily Accessible
  • Combination Motor Controls
  • Disconnects at Each Work Area
  • Jockey Grinder
  • Hand Tools
  • Children’s Playground
  • Spare Chipper Knives
  • (2) Diesel Power Units
  • Simonds Chipper Knife Grinder, 60”, Model 60VB054V3X, S/N 1760
  • Will Sell Whole Building
  • Cornith (2) HB Sawmobile w/Husk, Cab, Detroit Diesel Power Unit
  • Precision 58:15 (3) Knife c-2969 HFTD Chipper
  • HMC AC43 (3) HB Carriage w/Track & Rail, Husk & Saw Cab
  • Curtis RS Series 20 HP Air Compressor RS30A, S/N D30080001
  • Precision Barn Sweep w/Incline Section Under Head Saw
  • Barn Sweep Conveyor Length of Mill Building
  • Miner Edger
  • Tank Mount Air Compressor, 5 HP
  • Hyster International TD9 Series B Dozer